Home > Products > Stainless Steel > 4*8 FT 3mm 304 316 Checkered Stainless Steel Sheet Acero Inoxidable Cuadros Hojas for Building Decoration
4*8 FT 3mm 304 316 Checkered Stainless Steel Sheet Acero Inoxidable Cuadros Hojas for Building Decoration
4*8 ft 3mm 304 316 checkered stainless steel sheet acero inoxidable cuadros hojas for building decoration PRODUCT DESCRIPTIONStainless steel checkered plate is manufactured by cold rolling sheet and hot rolling stainless steel sheet. Due to the excellent corrosion resistance and slip resistance, it ......
Send Inquiry
Product Description
4*8 ft 3mm 304 316 checkered stainless steel sheet acero inoxidable cuadros hojas for building decoration PRODUCT DESCRIPTION
Stainless steel checkered plate is manufactured by cold rolling sheet and hot rolling stainless steel sheet.
Due to the excellent corrosion resistance and slip resistance, it has been used in many industries as food industry, buildings, water heater, bathtub and dinnerware etc.
SPECIFICATION
THICKNESS : 1.0, 1.2, 1.5, 2.0, 2.5, 3.0mm for cold pattern; 3.0-14mm for hot pattern;
SIZE: 1000X2000MM; 1220X2440MM; 1250X2500MM, 1500X3000MM or as required;
PATTERN: Many types can supplied as Diamond type, Bean type, "T" type etc.
COMMON GRADE
SS201, 202, 304/304L, 309S, 310S, 316/316L, 316Ti, 409L, 410S, 430, 446 etc.
Type 304, for most environments, is sufficient to prevent corrosion.
Type 316 should be used near the seacoast.
Low carbon grades (304L / 316L) should be used when parts are to be welded.
For extreme locations, e.g. near chemical plants or where steel may come into contact with salt water spray, different alloys will be required, subject to application review.
APPLICATION
Floor Covering and slip resistance; Commercial vehicle and vans; Access ramp covering for wheelchairs.
Wall and column protection to prevent impact damage where hand trucks, trolleys, sack carts are operated.
Door protection as kick plates or as a full door cladding etc.
Packing & Loading
Warehouse
Our Certificate
Our Customers
FAQ:
Q: How about the MOQ? If my first order qty is small, will you accept?
A: We would like to do our best to support your trial order qty, so even 1 pc or 1 kg is ok to start cooperation; because we have
confidence to move on second order with your esteemed company.
Q: What is your payment terms ?
A: Commonly two payment term for new customers:
1) 30% T/T as deposit , 70% balance against B/L copy;
2) 100% Irrevocable L/C at sight;
If you need any other terms, pls feel free to contact us too, we will try our best.
Q: How long is your delivery time?
A: Our daily inventory is more than 8000 tons, so for common product size, just need 5 days from stocks; if the special size from
new production, delivery 20-30 days.
Q: How about the samples ? is it free or extra fees?
A: Yes, we would like to supply the samples before order; if the samples from stock, it will be free; if the samples from new
production, we will charge some reasonable cost, but this amount will be deducted from your first order invoice.
Q: How to control and guarantee your shipment quality?
A: 1) All our factories are ISO9001 certified facility; 2) World famous origin mills as TISCO, Baosteel
3) Ex factory inspection by our own laboratory 4) SGS/BV Third party inspection before delivery
Q: Is there any aftersales service? How long guarantee for your product ?
A: Yes, we will provide the after sales service; so if there is any confusion or problem during your usage process, pls feel free
to contact us anytime, we will do our best support.
If any request, welcome to send an inquiry, we will quote the best price for you !!!
Stainless steel checkered plate is manufactured by cold rolling sheet and hot rolling stainless steel sheet.
Due to the excellent corrosion resistance and slip resistance, it has been used in many industries as food industry, buildings, water heater, bathtub and dinnerware etc.
SPECIFICATION
THICKNESS : 1.0, 1.2, 1.5, 2.0, 2.5, 3.0mm for cold pattern; 3.0-14mm for hot pattern;
SIZE: 1000X2000MM; 1220X2440MM; 1250X2500MM, 1500X3000MM or as required;
PATTERN: Many types can supplied as Diamond type, Bean type, "T" type etc.
COMMON GRADE
SS201, 202, 304/304L, 309S, 310S, 316/316L, 316Ti, 409L, 410S, 430, 446 etc.
Type 304, for most environments, is sufficient to prevent corrosion.
Type 316 should be used near the seacoast.
Low carbon grades (304L / 316L) should be used when parts are to be welded.
For extreme locations, e.g. near chemical plants or where steel may come into contact with salt water spray, different alloys will be required, subject to application review.
APPLICATION
Floor Covering and slip resistance; Commercial vehicle and vans; Access ramp covering for wheelchairs.
Wall and column protection to prevent impact damage where hand trucks, trolleys, sack carts are operated.
Door protection as kick plates or as a full door cladding etc.
Stainless steel sheet main surface
| 2B | The surface brightness and flatness of 2B is better than 2D then theough a special surface treatment to improve its mechanical properties,2B could nearly Satisfy comprehensive uses |
| no.4 | Polished with abrasive belt of grit#150#180,have better brightness with discontinuous coarse stria, but thinner than NO.3, are used as bathtub buildings inner and extemal omaments electrical appliances kitchen utensils and food processing |
| BA | Cold rolled, bright annealed and skin-passed, the product have excellent brightness and food reflexivity like mirrorm kitchen apparatus, omament etc. |
| HL | Polished with abrasive belt of trit#150#320 on the NO.4 finish and has continuous streaks, mainly used as buildings omaments elevators, door of building, frontal plate etc. |
| 8K mirror | high gloss, polished stainless steel; It is designed for architectural applications; however, artists and others find many creative uses for this mirror finish product. Because of its uniform consistency, #8 Non-Directional is excellent for panel-to-panel matching. It is highly reflective making it suitable for mirrors, wall panels, coping and trim. |
Products pictures
Packing & Loading
Warehouse
Our Certificate
Our Customers
FAQ:
Q: How about the MOQ? If my first order qty is small, will you accept?
A: We would like to do our best to support your trial order qty, so even 1 pc or 1 kg is ok to start cooperation; because we have
confidence to move on second order with your esteemed company.
Q: What is your payment terms ?
A: Commonly two payment term for new customers:
1) 30% T/T as deposit , 70% balance against B/L copy;
2) 100% Irrevocable L/C at sight;
If you need any other terms, pls feel free to contact us too, we will try our best.
Q: How long is your delivery time?
A: Our daily inventory is more than 8000 tons, so for common product size, just need 5 days from stocks; if the special size from
new production, delivery 20-30 days.
Q: How about the samples ? is it free or extra fees?
A: Yes, we would like to supply the samples before order; if the samples from stock, it will be free; if the samples from new
production, we will charge some reasonable cost, but this amount will be deducted from your first order invoice.
Q: How to control and guarantee your shipment quality?
A: 1) All our factories are ISO9001 certified facility; 2) World famous origin mills as TISCO, Baosteel
3) Ex factory inspection by our own laboratory 4) SGS/BV Third party inspection before delivery
Q: Is there any aftersales service? How long guarantee for your product ?
A: Yes, we will provide the after sales service; so if there is any confusion or problem during your usage process, pls feel free
to contact us anytime, we will do our best support.
If any request, welcome to send an inquiry, we will quote the best price for you !!!
Related Category
Steel & Products
Steel Pipe & Tube
Steel Coil & Strip
Steel Sheet & Plate
Stainless Steel
Aluminum
Non-ferrous Metal & Products
Copper
Alloy
Tungsten
Titanium
Iron & Products
Send Inquiry
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
